Brother HL-L2350DW Setup Guide
The Brother HL-L2350DW sets up wifi directly from its control panel — no apps or computers needed for the network part. This guide covers wireless setup, WPS, USB, and printing from phones.
Step 1: Install toner and paper
Open the front cover, seat the drum and toner unit, close it, and load the 250-sheet tray.
Step 2: Wireless setup from the panel
Press Menu, navigate to Network → WLAN → Setup Wizard. The printer scans for networks — select yours and enter the password using the arrow keys.
Step 3: Or use WPS (fastest)
If your router has a WPS button, press Menu → Network → WLAN → Push Button Method, then press the router's WPS button within two minutes. The printer joins automatically.
Step 4: Install the driver
On each computer, download the full driver from support.brother.com or use the built-in OS driver. For USB, connect the cable when the installer prompts you.
Step 5: Print from your phone
Install Brother iPrint&Scan (iOS/Android). It finds the printer on the same wifi network automatically — no account needed.
Step 6: Confirm the wifi band
Like most Brother lasers, this model needs a 2.4GHz network. If setup fails, check that your phone and printer are both on 2.4GHz.
Stuck on a step?
Status light: solid blue means wifi connected; blinking means it is trying to join a network. Book a free consultation and we'll walk you through it — or book a setup appointment and we'll do it for you.